line in gpcal

Got a calibration problem? Discuss it here.

Moderator: Mark.Wieringa

Post Reply
xiaohui
Posts: 4
Joined: Wed Oct 30, 2013 4:30 pm

line in gpcal

Post by xiaohui »

After ATLOD with "options=RFIFLAG", the unflagged channels are from 102 to 1933. Should I set line=chan, 1832, 102 in
gpcal, so that this channel range is split into nfbin bins and the first bin starts from 102?

Thanks!
Xiaohui
Mark.Wieringa
ATCA Expert
Posts: 297
Joined: Mon Feb 08, 2010 1:37 pm

Re: line in gpcal

Post by Mark.Wieringa »

Hi Xiaohui,

Excellent question!
Yes, if the number of bins is large (e.g., 16), it would be better to set the line parameter the way you suggest. This would avoid having a first and last bin with nearly half the channels flagged.
If you have less than 8 bins it probably doesn't make much difference.
To check this indeed made a difference I updated gplist to list the mean bin frequencies for the frequency dependent gain table.

Cheers,

Mark
xiaohui
Posts: 4
Joined: Wed Oct 30, 2013 4:30 pm

Re: line in gpcal

Post by xiaohui »

Thank you very much, Mark!
Post Reply